- Helping operators build an extremely simple, highly efficient and all-band collaborating 5G network
- Assisting operators in building an ultimate 5G network with the lowest TCO to inspire the digital economy

- Unique 12TR tri-sector Ultra Broadband Radio(UBR) for simplest site solution
ZTE's 12TR UBR is unique in the industry, integrating 1.8GHz and 2.1GHz and tri-sector into one box with 12×120W ultra-high output power, which guarantees both the experiences of existing RATs and the evolution to 5G.
For the 12TR UBR working with the low-frequency tri-sector 6TR UBR, only two radio units are enough to support 5 FDD bands, making the site solution greatly simplified. Compared with the traditional solution, the energy consumption can be reduced by 30%. In addition, the existing antennas, power modules, batteries and other infrastructures can be reused to the maximum extent, further reducing TCO.
- Serial high-power UBR for RAN sharing
The serial UBR products support combinations of multiple frequency bands of Sub-3GHz and Sub-1GHz, as well as diversified transmission power from 4×120W to 4×180W. Also, the power resources can be shared among different frequency bands on demand.
Among these products, the 1.8GHz + 2.1GHz + 2.6GHz tri-band UBR offers the industry's largest transmission power – 4×180W, flexibly supporting multi-operator RAN sharing, while the industry's unique 900MHz + 1.8GHz + 2.1GHz tri-band UBR integrates the three most widely used FDD bands, achieving the minimum tower space.
- 128TR extremely-large antenna array AAU for future ultra-large capacity
Thanks to the innovation of the architecture and algorithm, the 128TR AAU can improve the dense urban coverage by 3dB, and more importantly, capable of 32 downlink data streams and 24 uplink data streams. Therefore, the cell peak throughput can reach 10Gbps, and the cell average throughput and the edge user experience can also be greatly improved.
- mmWave ultra-large bandwidth AAU and MiCell for more scenarios
MiCell, ZTE's innovative mmWave distributed micro-cell solution can achieve 4Gbps throughput per RF head. This solution can meet the ultra-high traffic demand of stadiums, exhibitions, transportation hubs and other places, and flexibly adapt to the diverse application requirements of ultra-high capacity, low latency, and high reliability in B2B scenarios such as smart factories.
Through the innovative architecture design of MiCell, the Intermediate Frequency(IF) modules are moved from RF heads to BBU to achieve IF resource pooling, which can be dynamically shared by all the RF heads. This architecture minimizes the complexity of the RF head, making it much smaller and lighter, and power consumption can also be significantly reduced. Thanks to the innovations above, MiCell achieves flexible and efficient deployment, and smooth coverage expansion on demand.
- iEasylink multi-band backhaul and MBS to improve reliability and distance
With the development of the 5G ecosystem, there will be more connections and services carried by 5G, driving the network evolution continuously forward. ZTE's all-scenario UniSite solution helps operators build an ultimate 5G network with the lowest TCO to inspire the digital economy.
MEDIA INQUIRIES: ZTE Corporation Communications Email: ZTE.press.release@zte.com.cn